ZEFNET provides the ability to run various different reports, with download capability. This article outlines details of the fields in the charging session report.
|Name||Name of the charger as specified in the ZEFNET Portal|
|Sticker||Sticker ID number as specified in the charger setup screens|
|Serial||Serial number of the charger, as reported by the charger|
|Initiator||Which partner initiated the session? ZEF? ChargeHub.. .etc? This will be blank if a free vend session.|
|Identity||The ID that the billing will be attributed to. E.g. ZEF User ID, ChargeHub User ID, the ID that the Credit Card Reader shares with the Charger when authorization a charge etc. Note: The Credit Card Reader shares an ID that doesn't change with the charger, and the charger recognizes that this ID is "The Credit Card Reader telling me that I have an authorized user", but is NOT the unique user. The Credit Card Reader does NOT tell the charger WHO swiped the card, simply the fact that someone successfully swiped a card, and is telling the charger to allow a session to start.|
This field can be useful identifying the unique users count on a charger, if an app
|Start||On a L2, it signifies either when a vehicle was plugged in or the Start button was pressed on an App. On a DCFC, this means a DCFC has requested to Start a Session - this is no guarantee that a session will start though.|
|Plug Duration||The total time that a vehicle is plugged in.|
|Charge Duration||The total time that a vehicle is charging (aka pulling power).|
|Energy||Amount of energy used during the session.|
|Cost||Cost of the session.|
|Bill Details||If the cost profile has been setup in the Billing module, then a detailed Bill will be available for review. If the cost profile is setup in the normal charger setup window, then the Bill detail will not be populated.|
Example of Billing module:
This allows for fine-grained setting of charges on a charger. Creating a billing profile, will lead to Bill Details object being generated in the charging sessions report. If there is no billing profile associated with the charger, the Bill Details object in the report will NOT be populated.
Example of Simple L2 Billing screen:
To setup L2 billing in a simple way, you can enter the charger configuration through the EDIT button on a specific device. Creating L2 billing in this way will NOT result in the Bill detail object being populated in the charging sessions report.